How to Change Your Heater


1)      First remove the screws around the wood frame that goes over the heaters.

 2)      Pull out the wood frame and the heater will be attached to it. Unplug the heaters connector. If the heater is only being inspected re-plug the connector to see if the heater now works. If the heater is being replaced pull out the heater from the wood frame by sliding it out of the bottom.

 3)      Slide the replacement heater into the wood frame and plug the two connectors.

 4)      Place the wood frame and its heater back into place and fasten using the screws that were removed in step 1.

How did we do?