How do you install an Aqua Trol Salt System?

Updated a minute ago ​by Meagan W.

Installation Installation must be performed in accordance with Local and NEC codes.

Preparing Pool Water Refer to page 2 of the manual for recommended chemical levels. The pool's chemistry must be balanced BEFORE activating the Aqua Trol. NOTE: If the pool does not have new water, add 1 quart (1 liter) of metal remover and 1 quart (1 liter) of non-copper based algaecide to the pool, per manufacturers instructions. This ensures a quick, trouble-free transfer to the Aqua Trol system.

Mounting The Aqua Trol Control The Aqua Trol is contained in a rain-tight enclosure that is suitable for outdoor mounting. The control must be mounted a minimum of 5 ft. (2 meters) horizontal distance (or more if local codes require) from the pool. The control is designed to mount vertically on a flat surface. Because the enclosure also acts as a heat sink (disperses heat from inside the box), it is important not to block the four sides of the control. Do not mount the Aqua Trol in a panel or tight enclosed area.
The manual will include a photo of how it ties in with everything else at your equipment pad, such as your pump and filter. 


How did we do?