Operating the Hayward ColorLogic Light

Updated 4 months ago ​by Greg Rohde

Unless you have a ColorLogic Light Controller, or another type of control for your ColorLogic light, you will have to power-cycle the light in order to control the color.

Power-cycling the Hayward ColorLogic Light is a method of changing color and light show modes which requires no special controller or interface. 

  • To activate the light, simply turn on the switch. 
  • To deactivate the light, turn off the switch. 
  • To advance to the next program, turn the switch off, then back on within 10 seconds. 
  • Whenever the light has been off for over 60 seconds, and is first turned on, it will come on to white for 15 seconds for quick clear view of your pool, then go to the last fixed color or color show it was running.

How did we do?